How do you get access to remove/replace the duct outlet assembly on a Maytag LDE9316? Thanks.
Answer Lynn, You first need to remove power to the dyer, remove the front panel assembly, you'll need a flat blade screw driver to release the spring clip on the bottom edge of the panel, and pull out, until the top clip releases from the dryer top panel. Reach inside the tumbler and remove the four(4) 1/4 in. hex head screws in the recessed areas of the front bulkhead. Make sure when you reassemble the outlet duct to the front bulkhead, that the bottom duct is properly aligned and seated in the blower housing felt seal.