How do I get the dispenser cup assembly off of the agitator?
Answer Hello Dan. The dispenser pulls off the agitator. You will need to pull upward on it, to remove it. Hope this helps.
1 person found this answer helpful.
My washer did not have an installed fabric dispenser. How do I remove the agitator cap to install one that is listed on your website to fit my machine.
Answer Karen, You will need a small thin bladed flat screwdriver. You'll need to insert the end of the blade into the seam between the agitator cap 3355758 and the top of the agitator 3348752 and pry up on the cap, some agitators have an area molded into the top, so you can insert the screwdriver blade into. Be careful not to scrape or gouge the agitator.
Note: This question is for the older version of this part, but we thought you might still find it helpful
How do I remove and replace the Maytag washer Dispenser assy., Fab Softner, Part # AP4028739 ?
Answer Hello Barry. Grasp the dispenser assembly 21001905 and pull upward to remove it from the top of the agitator assembly.
Como puedo quitar la parte superior del agitador ? Esta entra a presion??
Answer Hola Edwin. Se tire hacia arriba en el dispensador de tela 21001905 para eliminarlo. Algunos de estos tomar alguna fuerza para quitar. Espero que esto ayude.
Agitator top with liquid dispenser will not stay in place in machine. It no longer agitates.
Answer Check and see if the bolt that hold the agitator is loose, or if the agitator is broke. It is located under the dispenser cup assembly. Hope this helps.