We want to change our white glass doors, panel, and handles on our double oven to stainless. Can you please provide the part numbers I will need for the upper and lower oven?
Answer Hello Melanie! The lower and upper oven door outer glass is part number 9759074 and both doors use a black handle part number 4448854. You'll need to change the hinges to withstand the stainless doors- The upper door hinges are part numbers 9760573 and 9760574. The lower door hinges are part numbers 9760566 and 9760565. The control panel part number 8300435 and oven bottom trim part number 4448477 comes in black only. The left side oven trim 4450853 and right side oven trim 4450850 have been discontinued and are no longer available. Thanks.
Please provide detailed removal and installation information. Thank you!
Answer Hello Susan. To change the glass in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door glass, you will reinstall the oven door back onto the range in reverse order of the way you removed it.
Want to change oven door from black to stainless steel. Is that possible on this model? Thank you.
Answer Sharon, the outer door in stainless is part number 9759074. The stainless door uses a different hinge, part number 9760573 for the right side and 9760574 for the left side. If needed, the stainless model uses control panel part number W10122303, left side trim part number 9757734SS, right side trim part number 9757735SS, upper oven vent part number W10160347, lower oven vent part number W10154789, and drawer panel part number 4453921SS. You may click on the part numbers to view the parts information online. If you have any questions please let us know. Thanks.
Looking to change my black double oven with stainless steel doors. Can you recommend the parts needed? Also would like to change the handles from black to stainless. Is this possible? Thanks!
Answer Hello Caroline! You'll need the stainless outer door glass part number 9759074 for both the upper and lower oven doors. The door hinges for the stainless/black model are part numbers 9760574 for the left and 9760573 for the right. The manufacturer does not list the handles in stainless. The only stainless part is the outer doors. Thanks!
I would like to know there are any stainless steel parts that I can use with this model instead of black? Also, for model number jmw9527cab. It's a microwave wall oven combination. Thank you.
Answer Hello Zannew! For the range stainless model, it uses control panel is part number 5765M317-60, handle part number 74006895, and outer door glass part number 74006894. Unfortunately, the parts listed for the stainless microwave model have been discontineud and are no longer available. Thanks.