What is the estimated cost for the oven door and do you have one to purchase?
Answer Hello Robert! Unfortunately, the manufacturer does not offer the oven door as an assembled part. If you need the outer door glass you may use part number W10118454. Thanks!
The interior glass on the oven door has slid to the right side about three quarters of an inch. How do I reinstall this glass? It has a metal part on the edge of the glass.
Answer Hello Curtiz,
There should be a bracket of sorts inside the door that retains the glass. There will most likely be a screw that has come out allowing the glass to move inside the door assembly. The metal part at the edge of the glass that you can see indicates that this is the glass package that has moved. You will need to remove the door from the unit and remove the screws along the bottom of the door assembly and if there are any on the sides, remove them. Be sure to keep up with where they came out since this is where they will have to be reinstalled.
Hi, I have a Whirlpool Stove, model # RF263LXTQ, I had to remove the outter oven door glass and the entire inner glass fell out, is there a way I can remove the whole oven door and put it back together? I can't door it when it's standing up. Thanks.
Answer Hello Ken. To change the glass in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door glass, you will reinstall the oven door back onto the range in reverse order of the way you removed it.
How do you order the correct color for the oven outter glass door for moder no. RF362LXSTO serial no. RT4322630?
Answer Hello Letta! For the stainless outer door replacement use part number W10144884. Please note, the stainless with black glass is no longer available and the clear stainless is the only option available. For the white door glass use part number W10118454. For the black door glass use part number W10118455. The biscuit colored glass has been discontinued and is no longer available. Thank you for your inquiry.
looking for outer glass door in white -
Answer Hello Tony. The outer door glass in white for your model number is part number W10118454. Thanks!
Do you have this part in Bisque.
Answer Hello Angela. The bisque option for this model number has been discontinued by the manufacturer and we no longer have any left in stock. The old part number for this glass was W10010670. Sorry.
Please give me instructions for taking the door off and replacing this outer glass.
Answer Hi Melissa. Open the door and lock the door hinges for door removal. Put the door on a protected table top. Use a shop vac to clean up the glass. Remove the door handle screws. Remove the side and lower front glass side trim by removing the underside 3-trim screws. Then the glass part # W10118454 will slide out with the trim removed. It will slide up into the bottom of the top handle trim. Thank You.
Note: This question is for the older version of this part, but we thought you might still find it helpful
How can I remove the oven door? Give me directions ,please.
Answer Hi Misha. Open door fully. Look at the hinge side area's. In the middle there are small holes that go all the way through. Use a screw, nail or pick tool to slide from the inside to the outside and block/lock the hinges. Lift door and as the hinges lock, lift up and pull back as the hinge will come out of the receiver.Glass is part # W10118454. Thank you.