Looking for glass for oven door for model number rf378pxg2.
Answer Hello Marie. Part# [AP3886532} is the correct outer door glass for your model.
How do I install the front replacement glass on my oven door?
Answer Hello Louise. To change the glass in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door glass, you will reinstall the oven door back onto the range in reverse order of the way you removed it.
I need the outside glass for the door.
Answer Oscar, the door glass in white is part number 9762476, black is part number 9762477, and the colors bisque and almond are now the same part number, 9762478. Thanks!
Need installation instructions on how to replace exterior (outer) glass door panel.
The model number listed is not showing as a valid model number. Please recheck the model number. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx
Do you have the front glass piece to the oven door?
Answer Stephanie, the outer white door glass listed for your model is part number 9762476. Thanks!