Dose anyone happen to know what the leveling feet bolt size for a Kenmore washer model 11029522800 is. Because i would like to replace them with wheels. Thanks
Answer W, You really don't want to do that, install wheels on the base of the washer. The movement and vibration from the moving parts and tub are transmitted into the frame, from the frame to the feet, and from the feet to the floor, so the washer would have a tendency to "walk" and vibrate. Besides the rear feet are part of a self leveling, self locking mechanism, and you'd have to modify the assembly to install wheels instead of feet. You may want to rethink this idea.
I'm looking for the front levelling legs and the rear self-levelling legs for both wfw8300sw00 and wed8300sw0. We are removing the pedestals from both and need the leg sets. Thank you.
This unit would only have leveling legs and not self leveling for the rear. The leveling legs for the washer are part number W10001130 and will need 4 of these and 4 locking nuts part number 3359452. For the dryer you will need 4 of part number 49621.
The washer does not have feet for leveling in the back of the machine. The machine is tilting to the right back and shakes very bad when spinning.
Answer Linda, There should be two(2) self levelling, self locking feet 285244. You'll need to lay the washer on its side or front, and check to see if the feet, are missing, and or if the locking mechanism/base is damaged. Thanks
What is the bolt size on part #ap3892282 ?
Answer Hi Roger. The manufacturer only list this as a part # W10001130. They do not give us this information. Thank You.