The dishes on the top rack will not clean.
Answer Hello Duke,
You should check the filters in the bottom of the tub. If they are clear, the chopper has most likely broken, that is, if your model has this type chopper. Since you didn't list a model number, I can only guess at the cause of the complaint. If you would like detailed instructions, please re-post with the model Number off of the I.D. tag of the unit.
My top rack of my dishwasher is lower on one side than the other. I bought a upper arm kit and the new arm hits on the lower side of the top rack. They have changed the part and the new one will not work.
Answer Hello Anthony. 675808 is the correct kit for the model number you provided. You will need to check and make sure the hanger for the spray arm is installed correctly and the spray arm is tight and not flopping around. This should work with the dishwasher if installed properly according to the manufacture. Hope this helps.
Upper spray tube broke at rack support. Is correct replacement of all necessary parts AP3115182 and AP3044177?
Answer Hello KB! You will need to check the upper spray arm mount 8268812 and the mount assembly 8539324 to verify which item has broken and replace. If needed the supply tube comes in kit 675808. Thanks!
A follow up question to the one you just answered. But, the AP3115182 clearly does NOT come with part #5, which is AP3178206. Why does it tell me to consider also getting that part? Doesn't make sense to me. Thanks
Answer Hello Wendy. Yes, 675808 is a kit, and according to the kit, it has everything you need. You will need to look and see if your mount assembly is angled. If so, you do not need to order 8539324. If not, you will need to order it. Thank You.