The appliance (stove, oven) was converted to LP and the gas company finally ran gas to the home. I need to convert it back to Natural Gas. What kit do I need?
Answer John, to convert back to NG you'll need three of the NG orifices part number 8273065 (for the left front, left rear, and right front burners) and one of 8273067 (for the right rear burner). Flip the regulator back to NG and adjust the oven orifices. Hope this helps, thanks!
I need to convert from natural gas to LP gas,do I need to change oven to.
To change the unit from Natural to Lp you will need the conversion kit part number 8523418. To convert the oven you will tighten down the orifices and open the air shutters. On the regulator you will need to flip the cap from Nat to LP.
I need to convert it from propane to natural gas.
Answer Ren, you'll need conversion kit part number 814390 to convert your model back to NG. Unfortunately, this item has been discontinued with no further replacements or cross references available and our company is unaware of any other available sources. Sorry about that!
I need to convert my stove from LP to natural gas. What do I buy?
Answer Ruth, you'll need the orifices part numbers 8273065 for the left front/rear burner, 8273065 for the right front burner, and 8273067 for the right rear burner. Thanks.
What kit to I need to convert from lp to natural gas missing spud kit on back of oven
This unit does not have a conversion kit back to Natural from Lp. You will need to order the individual orifices which are as follows: Left Front, right front and left rear 8273065, and right front part number 8273067. The oven you would loosen the orifices about 1 1/2 turns and partially close off the air shutters on the burner. You will also need to flip the pin under the cap on the regulator.