I lost one of the screws for this screen. Which screw do I need?
Answer Hello Viv. 3387230 is the screw for the lint filter grill. Hope this helps.
1 person found this answer helpful.
What screws fit the lint filter grille out?
Answer Hello! The lint filter grille uses two different screws, part numbers 3387230 and 488729. You may click on the part number of each item to view the images available to help verify which screw is needed. Thanks.
Hi - Our grill-out guard cracked and we are trying to find a replacement grill that will fit. Are there any compatible grill outs we can buy? If not, can we retrofit another in it's place? - Steve
Answer Steve, the outlet grille listed for your model is part number 3391931. Unfortunately, this item has been discontinued with no further replacements or cross references available and our company is unaware of any other available sources. Sorry about that!
Recently my maytag dryer 2000 series ,the outlet screen cover broke in half during use. I collected the broken parts. I continued 2 use my dryer 4 serveral more loads. I now hear strange noise while in use. I order the outlet screen cover.
There is a possibility that something has gotten down into the blower because the outlet screen cover not being in place. You will want to unplug the unit and take the front panel off and the blower housing cover off to check for debris in the blower wheel.
How many screws do I need for the lint screen? Is there any other screws on the inside screen to attach to the door?
Answer Hello Anna! There are two screws for the side of the outlet screen grille, part number 3387230, and one bottom, part number 488729. Thanks!
Does it matter where the black and yellow wires attach to on the Outlet Screen Grille?
Answer Hello Anna,
It doesn't matter which wire goes where in this case. The two sensors just have to be hooked up so when a wet cloth passes over it, it can read the resistance and operate properly.
Does it matter on the screen grille the yellow or black connecter where does each one go what goes on the top one and color goes on the bottom one
Answer Anna, Fortunately, it doesn't matter. The wires you're describing are for the "sensor" bar, so as long as both wires are attached to the bar terminals, you'll be fine. Thanks and Good Luck
Will this outlet screen grille fit our GE profile dryer?
Answer Hello Dan. No, you will need to order WE18X10010 according to the model number you provided. Hope this helps.
I need to replace the outlet screen in my dryer. Could you tell me the accompanying parts I will need to replace this, as in screws and sensor bar? Thank you.
Answer Hello Karie! The outlet screen is part number 8299979. This part is attached using screws part number 3387230 and 488729. The sensor on the outlet screen is part number 3387223. Please note, you should be able to use the existing screws and sensor from the previous outlet screen if the outlet screen is the only defective part on your appliance. Thanks!