We need to purchase a pan slide for this refrigerator appliance. Do you have it and what would it cost?
Answer Jeff, according to the model number supplied the pan slide is part number 2223320. This can be used as the left or right hand side. Thanks!
How do I remove the broken pan slider and replace the new one on my whirlpool fridge? The pan slider is model no. AP3180471.
Answer Hello Pam. There are two locking tabs on the slides. You release the tabs and the slides will slide toward the front and out of the unit.
Icemaker does not work.
Answer Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
I just sent a request about putting in a drawers slide for the crisper, and there are 2 small plastic dot protrusions one on each inner end that prevent the slotets from being engaged...do we remove these? how? we seem to have the right part as we have checked multiple web sites and all pointed to that popular part...the earlier email did not have that whirlpool model number...
Answer Rita, The "lower" crispers (meat pan and vegetable bin) pan sldes are molded into the cover or frame, and will require the repalcement of that part. The upper "crisper drawer(snack tray) pan slides attach to the metal frame of the shelf, then the pan slides into the pan slide. Could you re check which pan or drawer we are dealing with, and an e mail address so we can duscuss this further, if needed.