24/7 Customer Support

CHECKOUT
Items in Cart:
Total
$0.00

Customer Questions and Answers for Panel-Cntl by Whirlpool

  1. Our Price $124.93
    Compare At $147.67
    You Save $22.74
     
    • Part Number: AP4434653
    • MFG Part Number: W10254846
    • Made by: Whirlpool
    Add to Cart

Questions & Answers

For Whirlpool Panel-Cntl (Part Number: AP4434653)

Ask a Question

Most Interesting  |  Latest Questions

Do I get to select the color of this part? My washer is white.

Christopher M. for Model Number MDBH979AWW3

Answer

Was this helpful?

1 Answer

Hi, Seems we are victims of the common problem of Maytag dishwasher touch panel failure. Started by not being able to press "Start", now only the lights on the right side work, left side and center you can clearly see water inside the panel buttons membrane. Only a couple of years old. My question is the ribbon connector from the touch panel. It appears to be directly soldered to our control circuit box (inside the door), but I did not yank on it to be certain. It seems to be the case on this replacement panel, which in appearance matches ours exactly, that it would slip on to a multi-pin connector. Want to verify that is actually the way these connect before purchasing, do not want to be de/resoldering anything. Thanks for any info.

Dan for Model Number MDBH979AWS3

Answer

Was this helpful?

1 Answer

The control panel will not light up. I can unplug the cord plug it back in and the lights come on for a second or two then go out.

Rex for Model Number mdb7749sbml

Answer

Was this helpful?

1 Answer

The dishwasher console you havelisted as part number ap4456940 has too many touchpad selections it as my original does. The one you have listed as part number ap4434653 looks like the correct one however it is in black and my dishwasher is white. what gives, if I buy the one with the extra touchpad will it work or do you have the black one with the correct number of touchpads in white. thanks.

Joe for Model Number mdbh989aww2

Answer

Was this helpful?

1 Answer

Does assembly W10254846 include the "handle" (item 8 in the exploded view)? It appears from the picture that it does but I am not sure. Thanks!

Randy for Model Number MDBH979AWB3

Answer

Was this helpful?

1 Answer

Dishwasher has been working fine for about four years. Now, Cycles buttons will not light up when depressed. Options button will light up. Unit will not start. I can run it through diagnostic check by pressing hi temp wash/heated dry three times. After that sequence all lights light up and unit appears to be working but does not fill with water and then stops. Suggestions?

Lisa for Model Number MDBH979AWS3

Answer

Was this helpful?

1 Answer

Maytag dishwasher has been working fine for 2 yrs. Tonight the Start button will not function. The Heavy/Normal/Light buttons light up correctly; the Hi Temp/Heated Dry/Sanitize also light up correctly; but Start and Cancel will not "press." I tried the Hi Temp/Heated/Hi Temp/Heated sequence, and got the machine to run through a self-check. During the check, all button lights (including Start & Cancel) did go on. But after self check, I still could not get the machine to start. Will this require a full replacement of the Control Panel (Part Number AP4434653) or the Electronic Control (Part Number AP4588346)? Thanks in advance for your help.

Amber for Model Number MDB7609AWS2

Answer

Was this helpful?

1 Answer

How to replace My control panel on my maytag dishwasher?

Joe for Model Number mbdh979awb3

Answer

Was this helpful?

1 Answer

My Maytag Dishwasher, front loading, Model #MDB7609AWW2, will not start when START button pressed. Some panel lights work: Heavy, Normal, Light, (lights are ON). When pushed, the Right Side Heat Dry Light comes On. The High temperature and No-Sanitize will not work. The door latch is mechanically good and thermal switch has continuity when tested while disconnected from panel. What to do: is it Touch Pad Control Panel or the Main Control Board? Thanks, Dan

Dan M for Model Number MDB 7609AWW2

Answer

Was this helpful?

1 Answer

The dishwasher does not run. No lights on the front panel are coming on. I have power to door switch and from door switch to control board. I disconnected ribbon cable to front panel and turned power back on. When I closed the door the drain cycle ran for 2 minutes. When I reconnected the ribbon cable to front panel the wash light lit up and the drain cycle ran again. After that no lights on front panel. Which part to change?

Joel for Model Number MDBH979AWB3

Answer

Was this helpful?

1 Answer

 

 
 
We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify