I just need the roller from the rack adjuster (AP4340235). Is that available?
Answer Hello John! The roller is not available separate from the adjuster W10153530. You will have to order the adjuster assembly to obtain the roller. If you would like to post your serial number we will be glad to verify which adjusters fit your unit. Thanks!
1 person found this answer helpful.
Are the wheels screwed on or riveted? Can they be removed?
The rollers on the adjuster are riveted in place.
I order it, received it, now how do I install it?
Answer Hello Maria. To replace the upper rack adjuster you would need to remove the screws holding it in place. The screws are on the outside part and would screw into the cover. We do not have instructions available for replacing the adjuster.
I see that to replace the inside wheels on the upper rack you have to replace the whole adjuster assembly. I have the wheels the screw assembly in the middle has came out are they available so that I don't have to replace the whole adjuster assembly?
Answer Deb, The wheel hub/retainer are not available as a separate component. Unfortunately you will need to replace the rack adjuster assembly. If your dishwasher serial number starts with the numbers 22 or less, you will need to replace the rack assembly W10337961 If the serial number starts with 23 or higher the rack adjuster(s) are : W10153530 left side, and W10153532 right side.