The "Replace Water Filter" light has been on for a while on my Maytag Refrigerator. I replaced the filter but the light did not reset. How do I get the light to turn off?
Answer Hello! Per your use and care manual: To reset the CHANGE FILTER light: Press and hold the LIGHT and LOCK pads until the CHANGE FILTER light blinks (approx 3 seconds). The control is now reset for 12 month or another 416 gallons. Hope that helps!
2 people found this answer helpful.
After replacing the filter UKF7003 the water and ice maker stopped working. I did the hold light/lock button to get filter light to go out and it did. It was working for awhile and then just stopped.
Thank you in advance
The best way to determine what the failure is, if you have a filter bypass then take the filter out and put the bypass in and see if the water is working. If the water is starts working then the filter is bad and would need to be replaced. If the water still does not work then you will want to check the water supply to make sure that it is on and that water is coming through the water valve. If water comes through the valve then the issue would be with the filter head.
How many glasses of water do I run to clear the filter?
Answer Rae, you will need to run at least one gallon of water to purge the water line. Thanks.
I change the filter and now I have white stuff floating in my water
In a lot of cases the white particles if real tiny are calcium in the water but if they are larger then it may be an issue that the water tank has calcium residue built up in it and causing the issue.
How long is this filter supposed to last?
Answer Bill, it would depend on the usage of the filter. The manufacturer recommends replacing water filters every 6 months or approx. every two gallons. Thanks.