My washer will fill and wash but will not drain or go to next cycle to spin.
Answer Hello Stephanie. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx
MY MAYTAG WILL AGGITATE BUT WON'T SPIN. WHAT IS WRONG.
Answer Hello Mary,
You will want to check to make sure that the drain pump is not clogged and make sure that the bearings on drain pump have not gone out. Also check to make sure thrust bearing is releasing the brake by turning the large pulley on the bottom of unit. One way will turn without lifting and the other way should lift the brake off the stator and rotate.
My washer does not agitate in the rinse cylce, when in color, or delicate mode. It works fine on white cycle.
Answer Hello Raul. Based on the information you provided, it sounds like the timer 22002715 is bad and will need to be replaced on the unit.
How do I find and remove lid switch to check and see if it is working properly?
Answer Hello Blink. To access the lid switch 12001187 to test it, you will use a flat blade and release the clips 25-7220 and raise the top of the washer. Once the top is raised, you will see the lid switch on the right side under the top assembly. Hope this helps.
My washer does everything except it does not agitate or spin...the machine is working except for that.
Answer Hello Cindy. You will need to check and see if the lid switch 12001187 is bad and needs to be replaced. Hope this helps.