Sometimes seems to overflow but only sometimes.
You will want to check the pressure hose and air dome to make sure that they are not clogged. Also check to make sure that the pressure hose is not kinked.
Tub will fill but water will not stop. If I blow on pressure switch tube it stops. Also begins to fill again as it is agitating. Do I need a new pressure switch?
Answer Hello Lorna. If you can stop the water from entering the machine by turning off the timer or unplugging the unit, you will need to look for a bad pressure hose or replace the pressure switch. If the only way to shut off the water is at the shut off for the water hoses, you will need to replace the water valve in the unit.
My washer fills but will not stop filling. I have to shut water off or it will run on floor. Do I need a presure switch? Thank you. Willie.
Answer Hello Willie. No, based on the information you provided, it sounds like the water valve 21001932 is bad and will need to be replaced. Hope this helps.
Water won't turn off and also occasionally doesn't want to drain during spin. What do I need?
Answer Bruce, A quick easy way to check the water continues to flow, start the washer in a warm washafter a few seconds of fill, unplug the power cord at the wall. If the water continues to flow in, you have a faulty fill valve 21001932 . If the water doesn't flow in you have a bad water level switch or hose Y2201474 21001748. If you still have a drain issue after the fill valve or switch is replaced, then check the the drain hose and pump, for possible clogs or debris. Thanks and Good Luck