I tried cleaning my oven and the words check fuse 2 where is it located?
Answer Hello Peggy,
Based on the model number provided there is no fuse on this unit. You will want to double check the model number.
What is the causes of the burned terminal block?
Answer Hello Wilson,
Normal causes for a burnt terminal block are loose wiring or bad part.
Oven heating element gets very, very hot and will not turn off. We had to disconnect the range and then disconnect the heating element so we can use the range. Is this caused by the Terminal block?
Answer Robert, It could be, but it's not likely, You may have a shorted element or element wire, or a "stuck" relay on the ERC/Control 8190664 . You'll need to turn power off or unplug the power cord, slide the range out, remove both back panels and check for shorted, burnt, damaged wires and connections. If all's OK, you'll need to replace the ERC/Control. Good Luck and Thanks
I need a terminal block and ground strap. Does this terminal block come with a ground strap? If not do you have the ground strap separately?
Answer Teresa, You have the proper part number for the terminal block 8203546 and the ground strap part number is 3169573 , but it is no longer available. You could use a short piece of green colored 8 or 10 guage wire and attach it to the middle terminal or the block and the ground screw inside the junction box. You may want to contact the APP customer service line and place your order through the office, so they can verify the availability of the ground strap part. Good Luck and Thanks