Questions and Answers for Whirlpool W10245259 Terminal Block

Total
$0.00

Our Price	$15.84
Compare At	~~$18.85~~
You Save	$3.01

We have a bad upper over broil element, was arcing. Upon taking apart I noticed the wire that attaches to the element and the limit switch was frayed and burnt, I disconnected the wire and taped up the other wire figuring the rest of the stove and cook top would work until the new parts are received. Upon reseting the breaker the nothing worked until you turned a cook top knob then the clock would come on but nothing gets hot. Would this limit switch being out of the loop stop everything from working? Also is the wire used between the element and the limit switch a special wire?

Bill for Model Number MER6770AAW

Answer Hello Bill. If the limit switch is out of the loop, the heating circuit will not work on the unit.

Was this helpful?

Yes

1 Answer

Will a bad terminal block keep your oven and broiler from working?

Sly for Model Number cer1360aaw

Answer Hello Sly, Yes it certainly will. You see, both legs of the voltage and neutral/ground are all supplied through the terminal block. If you lose electrical continuity, the unit cannot operate properly.

Was this helpful?

Yes

1 Answer

The back right burner doesn't work and the oven on the functioning of bake doesn't work. We identified the ID part AP4507762 which is in design completely different from the existing design at present. We need your guidance to make sure that we purchase the right part. Can you help?

Solomon S. for Model Number Mer5755qaq

Answer Hello Solomon! If you are needing the terminal block the part number is W10245259. This is a manufacturer replacement part and may look different than the original currently on the unit now. The harness that connects to this terminal is part number 74008296. Thanks!

Was this helpful?

Yes

1 Answer

The terminal block I see in the picture looks different than mine. The one on the back of my stove has 6 contacts, two for each red, black, and white. Will this terminal block work?

Timothy for Model Number WFE361LVS0

Answer Timothy, according to your model number part number W10245259 is the correct replacement terminal block. Thanks!

Was this helpful?

Yes

1 Answer

The terminal block on the back of this stove has been damaged by what looks to be a defective part! One of the metal positive posts attached to the block worked its way loose and came in contact with the panel cover and created a dead short against the panel which burt a hole through the galv. panel cover. It also burt the red wire to the stove. Have you heard of this before? This stove is 2 years old and has worked fine. We noticed a flash and a pop 2 to 3 times (at different times) The short alos burt the positive leed on the pigtail, but looks ok to use. Need your thoughts?

Chester N. for Model Number MER7662WS

Answer Hello Chester. This was cause by the cord being installed improperly. One of the screws was not tight enough when it was installed. Over time is arcs and works it way off and burns things in the way. You will need to replace all burnt parts on the unit, including the cord. Hope this helps.

Was this helpful?

Yes

1 Answer

For WHIRLPOOL Terminal Block (Part Number: AP4507762) Is this the part that the main cord screws into? Hard to see from the photo. Thank You

John C. for Model Number CER3725AAW

Answer Hello John. Yes, W10245259 is the part the main cord attaches to. Hope this helps.

Was this helpful?

Yes

1 Answer

Customer Questions and Answers for Terminal Block by Whirlpool

Terminal Block

Questions & Answers

Most Interesting | Latest Questions