Would a bad timer be responsible for no heat? I know from other sections of your site the answer may also be the Igniter. Which is more likely to be the culprit?
Thanks for any insight.
The most likely culprit would be a bad igniter, flame sensor or gas valve. You can check to make sure that you are getting power to the igniter by accessing the igniter and turn unit on. If the igniter does not glow then you will want to check to make sure that you are getting power to the igniter. Unplug the igniter and check across the terminals for 120 vac with unit running. If there is not 120 vac then then you will need to check from black to ground to make sure that you are getting 120 vac. If you are still not getting 120 vac then the problem would be in the motor switch. If you are getting 120 vac then you would want to check the High limit thermostat and thermal fuse for continuity. If there is no continuity replace the part. If there is continuity on both then the timer would be the issue.
The drum will not tumble, but it heats. I checked the belt and it's not broken. The drum will turn if you turn it with your hand. Is this the timer or something else?
Answer Hello Allcia,
The belt 341241 is off. The belt on a dryer doesn't just come off by itself. Normally the idler pulley 691366 or the drum rollers 349241T,(two of these) have started resisting rotation to cause the belt failure. If the belt in on and not broken, and it's heating, the problem is most likely the motor run winding is open which will require the motor 279827 replacement to correct the issue.
How much will the Timer cost and how much will it cost to deliver to a New York address? How many days will it to get there?
Answer Hello Ravin! The model given, YLGR7467EQ3, does not pull in our systems. Can you double check this model number and also supply a serial number for further verification of the correct part needed? Thanks.
I live in Ontario Canada,I need a Timer Part#3976574,if I purchase it can it be posted to my home address? And what is the total cost?
Answer Hello Ravin, we are unable to ship outside the U.S at the moment. If you know someone in the U.S you can have it shipped to them and they can forward the part to you. Here is a link to our current shipping charges: http://www.appliancepartspros.com/customerservice/shipping.aspx . Thanks!