My washer doesn't fill with water, only works on spin; and I revised the coils and their are good. What could be the problem?
You will need to test the water valve to make sure that there is power getting to the valve. If there is power to the valve and the water is turned on then the issue will be a defective water valve. If there is no power to the water valve then the issue will be most likely with the timer.
Suddenly my refrigerator stopped working has no power in the door controls inside nor outside in the cold and heat controls are dead the only thing you have power That is the only interior lighting system, please tell me you can have. eternally grateful for your help ..
Answer Alexis, You'll need to move the refrigerator away from the wall enough to get behind it. You'll need to unplug the power cord and remove the cover in the lower right rear wall, to access the main control board WR55X10942 and visually inspect the board for damage, and loose connections. Power from the outlet enters the main control board, then the board converts the power to low voltage where needed and distributes the power to the components. Based on your post description, that's where you'd want to start checking.
Our washing machine will not turn on unless we bang on the machine and then it will start washing.
Answer Hello Ronald. It sounds like the unit may have loose or bad wiring. Also, you need to check the lid switch and make sure it is good on the unit.