Washer will not fill. If I advance dial to spin ,it will start to spin.
You will want to check the screens on the water valve to ensure that it is clean and not blocking water flow. Also check to see if the water valve is getting power when the washer is turn on and calling for water. If the valve is getting power then replace the water valve 22002360.
On this unit. All works good until the washer gets all the way to the rinse part of a reqular laod, then stops and hums? I can then slowly push the timer to spin, and all works good. I've done this a couple of times. Do you feel it's the timer?
Answer Hi. If your timer buzzer's and chatters at the same time then replace it with part # 22001924. If you have to manually advance the timer then the inside cam gears have worn out on this spot and needs replaced. Also use a bucket and flush out the fill hoses sediment one at a time. Look at the back of the water valve at the inlet screens where the hoses hook up. Mainly the cold side will clog up and not allow cold water fill. If the humming is coming from the water valve then you need to replace it. If you have a unit with the first 2 serial numbers starting with 10 then it takes part # 22001274. If the serial # starts with 14 then you need water valve part # 22002360. Thank You.