The tub is unbalanced, it wont stay in the center of the machine, when water fills it goes over the tub sides onto the floor. Do I need tub pads or some other part?
Answer Yes, these suspension pads will help with the out of balance issue. You will need to change the other suspension pads as well. 285219
1 person found this answer helpful.
During the start of the spin cycle there is a loud single knock in my washer, and while the spin continues it is getting slower and slower. I hope you can help me about this problem. Thank You and Good Day !
Answer Joseph, You'll need to remove the spanner nut and spin basket so you can check for a worn drive block 389140 and drive tube assembly. If the tabs on the top of the drive tube or the "keys" in the drive block are worn the drive block will slip on the drive tube and make a knock noise, It can cause a slow spin as you described it.
My washer walks away on its own. What do I need for parts?
Answer Check all your springs and pads for wear. Check the feet as well, to make sure the rubber is not wore off. These usually cause these washers to walk.