Questions and Answers for Whirlpool 22003245 Valve, Water

Total
$0.00

Our Price	$66.93
Compare At	~~$79.65~~
You Save	$12.72

My Washer has started giving me a NF code when washing on the cold cycle. It act as if it is trying to fill with water but does nothing (there is a buzzing as it does this). Research suggest we look into replacing the water inlet valve and we want to make sure that we order the correct part. The model is MAH5500BWW and the serial number is 89953424AL . We are also looking to replace seal around the door as it has mold on it that will not come off no matter how much cleaning. Thank you,

Varonica for Model Number MAH5500BWW

Answer Hello Varonica. Check and make sure there is no clogs in the screens and if not, you will need to order and replace the water valve in the unit.

Was this helpful?

Yes

1 Answer

I have a Maytag Neptune washer that has been gradually taking longer and longer to fill and will often get "NF" indicating No Fill. Model MAH5500BWW. SN A2981502CE. Which is the correct water valve replacement PN? Thanks, EG

Eugene for Model Number MAH5500BWW

Answer Eugene, the replacement valve is part number 22003834. Thanks!

Was this helpful?

Yes

1 Answer

My serial number is A4814078CP. Is this the correct part for my machine? Part Number: AP4026884 MFG Part Number: 22003245 My water pressure from through the hoses in a bucket is great. When the washer runs and hits the rinse cycle the pressure drops and tries to fill until the no fill warning comes up and won't complete the cycle.

Charity L for Model Number MAH7500AWW

Answer Hello Charity. No, you need to order part number 22003834 for the water valve.

Was this helpful?

Yes

1 Answer

Hi I need Water inlet valve for my maytag neptune MAH5500BWW Ser# A940719EJ I think it is this one but a note says there are two option that need reference to Ser# THanks, Steve

Steve L for Model Number MAH5500BWW

Answer Hello Steve. Based on the model and serial number provided, 12001930 is the correct water valve.

Was this helpful?

Yes

1 Answer

My serial number is 67776500Zf. Do I need AP4026884 or AP4029160?

Don for Model Number MAW5500BWW

Answer Hello Do. Based on the model and serial number you provided, you need to order 22003834 for the correct water valve.

Was this helpful?

Yes

1 Answer

My Neptune washer is shutting off with message NF. Appears on cotton, heavy and stain mode the washer does not get enough water and therefore shuts off. All hoses are free and nothing on screens. In other smaller cycles washer works ok. What could it be and is it easy for me to fix myself? Please let me know and thanks. Ken

Ken M for Model Number Mah5500bww

Answer Hello Ken. Based on the information you provided, it sounds like the water valve 22003245 may be bad and would need to be replaced.

Was this helpful?

Yes

1 Answer

I just replaced the water valve to fix a lack of warm water flow and now the cold water flow is very poor (shut-off is fully open and all screens are clean). Is my new valve faulty or is there something else that controls the amount of cold water entering the dispenser?

Etienne for Model Number MAH5500BWW

Answer Hello Etienne. The water valve 22003245 had a thermistor built into it and this controls the mix of temperature and the solenoids controls the amount of water.

Was this helpful?

Yes

1 Answer

Can a faulty valve result in only a small amount of hot water entering the machine? Serial number is 10770355YZ. If so, correct valve number?

Etienne for Model Number MAH5500BWW

Answer Hello Etienne. Yes, if the valve is bad, it can cause the issue you are having. Based on the model and serial number, 22003245 is the correct valve.

Was this helpful?

Yes

1 Answer

The tub overflowed. The water continues to fill when machine is unplugged. I have to turn off the water at the facet. The spin cycle pumped out the water. Is a new water valve needed, and if so, which one? Will I need any additional parts to install? Thanks for your help.

Vicki for Model Number MAH5500BWW, Serial 67773197ZF

Answer Hello Vicki, When the water flows with the power to the unit disconnected, the water inlet valve 22003245 has failed. This should take care of the problem with no other parts. Be sure to unplug the unit and turn off the water before disconnecting the water hoses.

Was this helpful?

Yes

1 Answer

Which valve do I need? AP4026884 or AP4029160?

Josh for Model Number MAH5500BWW SN:A9378102EN

Answer Josh, according to your model/series you will use part number 22003834 for the water inlet valve. Thanks!

Was this helpful?

Yes

1 Answer

Customer Questions and Answers for Valve, Water by Whirlpool

Valve, Water

Questions & Answers

Most Interesting | Latest Questions