Just had a reverse osmosis filter installed and I want to bypass and/or cap the filter in my Amana refridgerator. The filter filter number is 12527304. What part do I need.
Answer Hello Rick,
In order to bypass the filter you will have to order a bypass plug. In order to get the plug you will have to order part number R0000009 which is the filter head and bypass cap.
BYPASS FOR KENMORE FILTER 46 9006
Answer Hello Luigi, the bypass is part# 12664501. Thanks!
I have a KitchenAid fridge that won't make any ice. We do have a Culligan reverse osmosis system but everything checks out fine there. The water filter on the fridge was replaced but I think the cap was thrown out along with the old filter. Do I need to buy a replacement cap? Can this fridge work without a water filter? Or should I buy a bypass filter cap? Thanks.
Answer Hi. You will not get any water pressure at the fountain controls without the bypass plug part # 61003791. The ice maker does not use the water filter to fill the ice maker. It is a dual valve part # W10408180. Remove the ice maker fill tube from the back of the unit to see if it is plugged with frozen water. Run warm sink water in it to thaw it. Dry it all the way. Then use a new clamp on the water fill tube at the back of the unit. If it is clogged it is because of a bad water valve. Thank You.
Do I need a bypass plug for my Kitchenaid refer?
Answer Hello Robert. If you do not want to use the filter, remove the filter and install just the cap into the unit. No bypass is needed.
Which bypass plug fits my Kitchenaid KSC24C8EYY02?
Answer Hello Andy. Per Factory No Filter By Pass Plug Is Required When Not
Using The Filter.