Will not fill with water. Replaced float switch. Placed dishwasher in service mode and engaged water valve which instantly burned out new float switch. I have checked for shorts and found none. Water valve tests ok, 1100 ohms.
The water valve resistance should be between 725O and 1200O of resistance, and with the resistance showing 1100O then it is within range. If the new float switch has failed then you will want to check power getting to the float switch as it sounds like it could be getting too much voltage in which case the control board would be the issue if the float switch is failing.
Looking at dishwasher the right wheel keeps coming apart, the wheel looks ruff. Is that the only piece I need or what do you recommend ?
Answer Hello Tim! If the right wheel is falling off the rack you may want to replace the wheel and axle to be on the safe side. The lower rack is part number 99002780 this includes the wheel and axle. The upper rack wheel is part number 903093, this also includes the wheel and axle. Thanks!