24/7 Customer Support

CHECKOUT
Items in Cart:
Total
$0.00

Customer Questions and Answers for Whirlpool Direct Drive Washer Pump by Whirlpool

  1. Sale
    Our Price $27.18
    Compare At $69.65
    You Save $42.47
     Watch Video
    • Part Number: AP2907492
    • MFG Part Number: 3363394
    • Made by: Whirlpool
    Add to Cart

Questions & Answers

For Whirlpool Whirlpool Direct Drive Washer Pump (Part Number: AP2907492)

Ask a Question

Most Interesting  |  Latest Questions

My washer just started leaking from the bottom this weekend. We ran a cycle and lifted the machine and saw water coming directly out of the pump part #AP2907492, but my question is, How do I know that this is the part that needs to be replaced verses the hoses? If I see the water coming directly from this part can I be confident in the assumption that this is the part to replace then?

Shea M. for Model Number LSB6300LW3

Answer

2 people found this answer helpful.

Was this helpful?

1 Answer

how is the direct drive washerpump secured ( attached ) to the motor ?

Guest

Answer

2 people found this answer helpful.

Was this helpful?

1 Answer

Machine fills and agitates for wash cycle. Stops at drain and spin. Whaat would cause this???

Kevin for Model Number lsn1000kqo

Answer

1 person found this answer helpful.

Was this helpful?

1 Answer

Water drains on floor between wash and spin before rinse. The washer has gone thru its normal wash cycle with no problem. There is a large black spot on the floor beneath the washer as well. What is the possible problem here?

Linda for Model Number LLR61441BQ1

Answer

1 person found this answer helpful.

Was this helpful?

1 Answer

I took my pump out and a brass pin fell out and I don't know where the pin hooks back in it. Can you please help me?

Ashley for Model Number 110.27812690

Answer

1 person found this answer helpful.

Was this helpful?

1 Answer

Could the washer pump be going out allowing too much water through at one time causing an overflow to the standpipe? There is no clog in the line, I have snaked it multiple times along with the vent, and replacing the standpipe drain, no clog there.. im running out of ideas. Anything in the washer itself that could cause this? It is a Kenmore 80 series model#110.26852504 thanks.

Jason for Model Number 11026852504

Answer

Was this helpful?

1 Answer

This Whirlpool Washer has (4) Temp. Settings, Cold, Cool, Warm & Hot. When you turn it to Warm and start the Washer just cold water comes out. Before when you tryed to wash in warm the washer ran hot water for a while then cold water it would do that until it was full of water then started washing, that was the way it regulated the Temp.

Lonnie for Model Number WTW4930XW3

Answer

Was this helpful?

1 Answer

Very little cold water comes out that goes into tank. How can I check if its clogged?

Sonny L for Model Number 992283800

Answer

Was this helpful?

1 Answer

TIA for reading. Please help me. Details ~ Washer Brand - Kenmore Model number 11023032100 Type 111 Machine has run fine over the years, NO major issues ever. Background~ Upper agitator is rotating clockwise and counterclockwise. I believe the agitator dogs have gone bad. After we noticed that the agitator dogs are bad we have used the machine a few times. Dogs have NOT been replaced yet Problem ~ Machine with a heavy load of JUST towels banged for a while than I forced the switch while in the rinse cycle to spin to force a quick completion of the cycle and STOP the banging. Clothes came out wet but WITH A LOT OF BLACK GUNK PARTICLES - LESS THAN AN INCH SIZE - THESE GOT STUCK TO THE CLOTH. Want to know what shall I fix given the background. I opened the machine and didnt find any major damage to the COUPLER. DIDN'T SEE ANY OIL OOZING OUT OF THE TRANSMISSION.MOTOR IS RUNNING FINE. The pump on this machine was replaced with a genuine FSP pump brought from your site 4 years back. Please help me before I replace the CLUTCH ASSEMBLY or any other part. Thank you.

Ajay K for Model Number 11023032100

Answer

Was this helpful?

1 Answer

Machine does not drain - hose is not clogged - when cycle gets to drain cycle it starts to spin & drain then shuts down? Do I just need a new water pump/

Tom for Model Number Whirlpool washer TAWB600JQ0

Answer

Was this helpful?

1 Answer

 

 
 
We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify