My refrigerator decided to stop cooling and freezing. I have unplugged for 30 minutes and replugged it to see if it will reset and it didn't work. I have also held down the Freezer and Fridge button and I got a blinking 98 88 on the freezer side and a solid 88 on the fridge side. I didn't get any kind of error code as well when replugging it in. Do I need to replace the PBA to fix this problem?
Answer Hello Dan. Here is a test you will need to do. Self Diagnosis: Press both buttons (Freezer– Fridge) simultaneously (No sound when both
buttons are pressed at the same time) ’til the display quits blinking and beeps, 8-12 seconds, then release and read Fault Codes. This will also cancel the Fault Mode created by self-diagnosis at power up. Lets use the number system for the code. The top bar on the number 8 is #1, and the right side top is #2, the bottom right is #3, the bottom bar is #4, The bottom left is #5, the top left is #6, and the middle bar is # 7. Let me know by the number system what code you have, and if it is in the refrigerator or freezer side of the display. When we get you code, we can look it up for you. Hope this helps.
I just tried unpluging the fridge for 40 minutes, the display did not change when plugged back in.
Answer Dan. Is there a number we can reach you at. We will not post this number to the site. Thanks.