Please provide detailed installation information for this part. Thank you!
Nicole M for Model Number rs277acpn/xaa
Answer Nicole,
To remove valve you will pull ice bin out. Once out there are 2 screws on the bottom of the tray that the ice bin sits. Remove the icemaker. Once out and the screws on the bottom of tray are out, you will pull the tray assembly out with the auger motor and the ice solenoid. Replace solenoid and reinstall.
Refrigerator and freezer not getting cold. All other electronics are working.
Dapper for Model Number RS2533SW
Answer Hello Dapper. Test for power going to the compressor. If there is no power there, it sounds like the main control board DA41-00134F is bad and will need to be replaced in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html