How do I remove this?
Answer Gene, Here are the removal instructions : 1. Disconnect electrical supply to range. 2. Perform cooktop removal instructions. 3. Move the two left top burner venturies out of the way to access latch mechanism. 4. Remove screws in front and on right side securing latch mechanism to range front frame and galvanized insulation retainer. 5. Carefully maneuver assembly to the rear to clear door
catch and light switch plunger. 6. Move assembly to the left side then lift up on the right side. After clearing the insulation retainer turn
assembly upside down to access screws securing components to mounting plate. 7. Reverse procedures to reassemble. Cooktop Removal 1. Turn off gas supply and disconnect gas supply line. 2. Turn off electrical supply to range. 3. Remove all four top burner control knobs. 4. Remove screws securing manifold panel. 5. Rotate bottom of manifold panel outward to disengage from tabs located on top. NOTE: When reinstalling manifold panel hooks. Place the top tabs first, then position manifold panel ABOVE flange on range front frame. 6. Remove top burner grates and cast burner caps. 7. Remove screws securing each BURNER BASE to cooktop/burner venturi. 8. Disconnect spark electrode wire from each burner base. Mark each burner base LF, RF, LR, and RR to avoid mix up later. 9. Remove screw securing BURNER SPARK ELECTRODES to burner base. 10.Lift up on front of COOKTOP and pull forward. Good Luck and Thanks