How do i remove the baffle from this unit?
Answer Hello Irving. To get to the screw you would need to pull the tub out and when you look into the large drain opening you may be able to access that screw. If you cannot get to it this way then you will have to take the tub assembly apart to get to it. You should be able to use the same screw that was in the original baffle.
How do I remove and replace the broken baffle on my Kenmore HE2t model 11047561603?
I normally remove the access panel and remove the hose from the outer tub that leads to the drain pump. If you use an inspection mirror, you can open the door and turn the tub around by hand to locate the screw on the baffle. Be careful not to drop it inside the outer tub to avoid a complete teardown. While you can sometimes get lucky and access the baffle screw through the water inlet opening at the top of the outer tub, this is not the best way since dropping the screw leaves no option but the teardown method. The other option is to pull the tub assembly from the units' cabinet and split the outer tub