Bake Element

Linda for Model Number Kitchenaid Seperba KERC507HBL3

Answer Hello Linda. Remove the power and the back panel on the unit. Then test the element and see if it is closed for continuity. If not, replace the element by removing the wires and screws in the back and slide the old element out of the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Ericm for Model Number 9752294

Answer Hello EricM. You need to pull out the unit and remove the power and the back panel on the unit. Then you can access the screws securing the bake element and remove the element on the unit. 

Ray for Model Number kerc607hbto

Answer Hello Ray. Pull out the unit and disconnect the power. Then remove the back panel of the oven. Now you can access the screws holding the element 9752294 in place. Unplug the wires and remove the screws, then pull the old element out of the unit. Reinstall in reverse order. Hope this helps. 

David for Model Number kerc607hwh4

Answer Hello David. You will need to test the bake element 9752294 and see if it is good. It should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Vic for Model Number GJP84802

Answer Hello Vic! You will need to unscrew the bake element from the bake wall of the oven. Once unscrewed, pull out from the back wall and remove the wiring from the element. Make sure you do not drop the wiring in the back of the oven wall. Once wires are removed, install the wires on the new element and put the element back in. Be sure to remove all power to the unit before attempting any repairs. Thanks!