Washer makes loud noise on spin cycle sounds like a bad bearing.
Answer Hello Sal. Then based on that information you will need to order 6-2040130 and 6-2095720 to repair the unit. Both of these parts, the bearing kit and the stem repair kit need to be replaced together. If not you will have leaks.
The drum bounces side to side,I opened the front and can freely move the shaft and dum,the base of the shaft also moves, is it the bearings or is something loose, pretty good fixer.
Answer Hi Larry. When you took the front panel off, did you notice a steel worn out mark from the lower damper assy. that sits on top of the base contact? There should be just the color of the base at this point of contact and "no -wear-through-marks" to the base assy. There are damper pads that are glued under the dome. This holds the "balance/centering" of the tub to the base. You can replace the pads to get the correct tension between the 2. The kit is part # 203956. Thank you.