The spring clamp that goes around the boot came loose. Is there any kind of diagram that shows exactly where the ring sits in the boot, as I am not sure where it goes?
Bob T. for Model Number ghw9300pw4
Answer Hello Bob. There is an inside lip that the spring clamp goes in. Be sure and get the boot seated on the front panel lip. Hope this helps.
2 people found this answer helpful.
This part fell off machine. I need instructions how to reattach it.
Guest
Answer Hello. These are a little tricky to reattach. You want the spring to be at the bottom of the boot, when trying to attach. Make sure the boot is seated in the grove, and start the clamp at the top of the boot, and work down toward the bottom, spreading the spring as you go. Hope this helps.
2 people found this answer helpful.
How do i install this part in my washer?
Leslie
Answer Hello. These are a little tricky to reattach. You want the spring to be at the bottom of the boot, when trying to attach. Make sure the boot is seated in the grove, and start the clamp at the top of the boot, and work down toward the bottom, spreading the spring as you go. You can use a pick tool to help with spreading the spring. Hope this helps.
1 person found this answer helpful.