Thanks for the previous answer. I wanted to make sure that water was getting to the water inlet valve on my Maytag Fridge. How do I get the plastic hose off the top of the water inlet valve? Where it's connected I see a little blue round thing on top of a little black round thing? Is there a trick to getting this off without putting a whole in the plastic hose? At first I thought that I could just pull the hose off, but that doesn't seem to be a good idea, so I stopped.
Answer Hello Jimmy. The thing your dealing with is called a john guess fitting. These are easy once you understand how they work. To remove it, you push in on the line,(toward the valve), and push the ring around the line toward the water valve. Now, while holding the ring toward the valve, Pull the line out. To install you push the line as hard as you can and it will "pop" in. Pulling on it seals the fitting. (You must pull on the line to make it seat and not leak). Hope this was informative without confusion. Have a great day!
Does the control board control the ice maker to control the water. My ice maker will drop ice if I manually pour water in machine. water valve and ice maker are good.
Answer Hello Ronald. You will need to check and see if the fill tube is frozen. If so, you will need to replace the water valve 67005154 and thaw out the fill tube in the unit. Hope this helps.