Note: This question is for the older version of this part, but we thought you might still find it helpful
My dryer igniter glows then shuts of but I do not get a ignition. I do have gas going to burner. What could be problem?
Answer Hello Ed. Check the coils 279834 and see if they test good. You can test the coils using a multi-meter TJMA-DM1. The two prong coil will read 1,000-1,300 ohms, and the three prong coil will read 1,300-1,400 ohms across prongs 1&2, and 500-600 ohms across prongs 1&3. Test the coils after running the dryer for about 10 minutes. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html