KFIS20XVMS2 dispenser pad or actuator is now sticking and making a clicking noise when pressed for water or ice. thought maybe something sticky (juice or pop) may have splashed onto the part, cleaned but getting worse, thoughts?
Answer Bryan, You'll need to check the pad 13005705 and yoke/chute assembly for a "sticky" switch or loose connection(s). You'll need to remove power to the refrigerator, and turn off the water supply. Remove the drip tray from the bottom od the dispenser and remove the two hex head screws, lift the facade up and off the door carefully. Label and mark all the wiring connectors and unclip the board if necessary. Remove the water tube from the chute/yoke assembly, remove the hex head screws holding the assembly to the dispenser housing. Reverse the procedure to re install assembly, and test dispenser operation.