Whirlpool 12001620 Clock Assembly - AppliancePartsPros.com

Total
$0.00

Part Number:	AP4009450
MFG Part Number:	12001620
Made by:	Whirlpool

Most Interesting

We have a fault code of F 5. We replaced the igniter and the heat sensor. What should we do now?

Mark for Model Number CWG3100AAB

Answer Hello Mark. Control Output Disabled. You need to replace the control in the unit.

Was this helpful?

My oven will clock goes off occasionally after heatup.Clock will just go blank but you can bump it with your hand and digital readout comes back.Oven has to then be reset.Any suggestions on the problem? Thanks.. Brent

Brent for Model Number cwg3100aab

Answer Brent, Since this seems to be "heat related", your first check should be at the Black (L1) and White (N) wires and the connections at the control board(clock) Check the "crimps" on the wire terminals (frayed wires, loose fit, etc.) and for tight connections on the control board terminals. Check the same wires, for a similar situation at the main terminal block. If alls OK, then replace the control 12001620 Thanks and Good Luck

Was this helpful?

How do you reset this oven?

Keith P. for Model Number cwg3600aab

Answer Hello Keith. You will need to disconnect the power to the unit for about 15 minutes to rest the clock 12001620 in the unit. Hope this helps.

Was this helpful?

Latest Questions

After hurricanr Irene, my oven gives error message "f5". All other functions in the pad are working. I tried to reset but still doesn't work. What part sould I replace?

Sam for Model Number CWG3100AAE

Answer Hi Sam. You will need to replace the clock control part # 12001620. It is because it has no output capabilities. Thank you.

Was this helpful?

My 10yr old Maytag wall oven turns on and works for about 10minutes, then it beeps and gives F5 error. per manual, we reset the oven and then it beeps and gives F3 error. F5 is code for electronic range control, and F3 is code for oven temp sensor. The clock, timer and all the up, down arrows work on the control pad. How do I know Which part needs repair and can we do it ourselves? We don't have oven technicians where I live.

Hdyspn for Model Number Maytag gas wall oven CWG3100AE

Answer Hello Hdyspn. Based on the information you provided, it sounds like the oven sensor 12001655 is bad and will need to be replaced. Hope this helps.

Was this helpful?

Gas oven repair for maytag oven cwg3100aae. After a bad storm (not a power surge)alot of electrical appliancese broke. My matage oven was one of the items. The digital clock wont work ethier. The only thing working is the light. Do you think I need a new clock assy? Do you think thats the problem? Thank you.

Mr Don for Model Number CWG3100AAE

Answer Hello Mr. Don. Test and see if there is power coming to the clock assembly. If so, and the clock does not work, you will need to replace the clock assembly 12001620. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Clock Assembly

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information