Whirlpool 74008629 Clock/overlay (blk)

Total
$0.00

Part Number:	AP4099352
MFG Part Number:	74008629
Made by:	Whirlpool

Our Price
$250.41
Regularly	You Save
~~$295.48~~	$45.07

Most Interesting

Oven will not heat to full temperature and seems to shut off. When unplugged and plugged back in, the code F-14 shows on the digital display. Burners and broiler are working fine. What could the problem be?

Shannonmarcano@yahoo.com for Model Number Maytag Gas Range

Answer shannonmarcano@yahoo.com, To properly assist you we will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx

Was this helpful?

oven wont shut off glow stick stays glowing

Rob for Model Number mgr5875qds

Answer Rob, If the igniter 7432P136-60 stays on, even after you cancel a cycle, Then the clock/ERC 74008629 would be the place to start. You could have a stuck relay, but you should have an error code in the display. If the igniter glows when you start a cycle, and shuts off when you cancel the cycle, then you'll need to check the amp draw of the igniter with an ammeter, to see that it draws at least 3.2 to 3.6 amps. and check the oven safety valve 12002604 and wiring for a shorted bi metal switch in the valve, or shorted wire to chassis ground completing the circuit and causing the igniter to stay on.

Was this helpful?

My oven no longer turns on. After I unplugged it it came up with a F-14 code. I think the control board is toast. Wondering if this is the correct control board and if it comes in white to match my stove.

Bob for Model Number mgr5875qdw

Answer Hello Bob, The part number you need to order for a white control is 5701M640-60.

Was this helpful?

Latest Questions

My Maytag oven starts beeping when it's been on between 30 minutes and an hour. Then at some point it shuts off and certain control buttons stop working. They eventually start working again once the oven cools off. I got on live chat and the person there told me it could be a burnt relay in the clock component. Does that sound to you like the issue or could it be something else? Two other points: 1. I just replaced the heat sensor that came in the mail from you guys today and that did not do the trick 2. There are no error codes appearing when this happens Thanks for your help

Greg for Model Number mgr5875qds

Answer Hello Greg, Based on the information provided it sounds like the the clock 74008629 is defective and needs to be replaced.

Was this helpful?

Clock/overlay (blk)

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information