Oven and broiler stopped working. Is the electronic clock oven control & overlay the possible problem?
Answer Hello Joe. Check and make sure there is no broken or burnt wires on the unit and 240 volts is coming to the unit. Test and see if the clock is sending power to the elements during the bake or broil cycle. If not, you will need to replace the clock assembly 74009226. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
How hard is it to swap out the part? I'm reasonably competent with fixing things.
Answer Hello Sarah. It is not hard to change the clock 74009226. You will need to remove the back panel off the control panel and disconnect the power to the unit. Once removed, you will remove the wires and the screws securing the clock to the panel. Reinstall in reverse order. Hope this helps.