Whirlpool 5701M509-60 Cntrl-Elec - AppliancePartsPros.com

Total
$0.00

Part Number:	AP4396934
MFG Part Number:	5701M509-60
Made by:	Whirlpool

Our Price
$211.23
Regularly	You Save
~~$253.48~~	$42.25

Most Interesting

My oven will not turn on. I replaced the igniter still will not light. Does this mean the control board is bad?

Ron for Model Number MGR5770ADQ

Answer Hello Ron. Test for power coming to the igniter. If there is power there, and the igniter does not glow, replace the igniter.

Was this helpful?

Clock will not work. Does not keep the right time. Also the timer is too slow. Will cause you too over the food. What part do I need for repair?

Roy Cato for Model Number mgr5780bdb

Answer Hello Roy. It sounds like the electronic control 5701M509-60 is bad and will need to be replaced.

Was this helpful?

During a thunderstorm this morning, I think we had a power surge. The only thing that appears to have suffered is the Maytag stove. The control panel lights up with pieces of all the led's, and the oven turns on to heat up. I have tried pushing the various buttons but they don't do anything. I tried holding the control lock down for over three seconds. Does this mean I need a new control panel or is there something else I could try?

Gayle for Model Number mgr5770adw

Answer Hello Gayle, The electronic control 5701M509-60 should take care of this issue. Any time the led display is affected, the control has incurred damage.

Was this helpful?

Latest Questions

Oven takes about 8 min to come on and burner short cycles sometimes after its up to temperature.

Fred for Model Number MGR5770ADA

Answer Hello Fred. Sounds like your ignitor 12400035 is in need of replacement. Have a great day!

Was this helpful?

I'm having big trouble with the F1 beep control. I've had the touch pad replaced twice already and will be calling our repair guy back AGAIN because it started up with the beeping. We thought the first time was just a faulty replacement part. But could there be something else that needs to be checked/replaced? It usually goes off about 30 minutes after I've turned the oven off. Any words of wisdom are greatly appreciated. Thanks!

Toomanybeeps for Model Number MGR5770ADW

Answer Hello Based on the code, it is not the touch pad, but the control board 5701M509-60 that is bad on the unit. Hope this helps.

Was this helpful?

When I press the bake cycle button, only the ignitor in the lower portion glows and does not burn, the broiler portion does not ignite or come on. When I push the broiler cycle button, the broiler works fine. Can you help me to determine what might be the problem. Thanks.

Herb for Model Number MGR5780BDS

Answer Hello Herb. You will need to test and see if there is power coming to the igniter 74007498. If so, and the igniter does not glow, you will need to replace the igniter. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Cntrl-Elec

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information