Electricity went out and when it came back on the control panel was dark, no clock, no oven settings, etc. Ordered a new board, how hard is it to change?
Answer Hello Brian. These are not hard to change. Disconnect the power to the unit. You will need to remove the back panel of the control panel. Then remove the screws securing the old control to the control panel. Unplug the wires from the old control and install them onto the new control. Reinstall with the new control 5701M576-60 in reverse order. Hope this helps.
Any tips to insure everything gets plugged in correctly?
Answer Hello Liz. When you unplug the waires off the old board, plug them to the new board. That way everything is connected where it goes. Hope this helps.