24/7 Customer Support

:

Chat with a Pro

Electronic Control Board

Part Number: AP3778695
MFG Part Number: 8205421
Made by: Whirlpool

Genuine Whirlpool part. Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others.
Whirlpool also makes various appliance models for Sears / Kenmore.

Appliance Compatibility Tool

Check your model number or use our Cross Reference Tool to determine if this part will work with your appliance.

Where can I find my model number?

More Product Images

Repair Help

Cross Reference Information

Part Number 8205421 (AP3778695) replaces 1065784, AH972817, EA972817, PS972817.

Have a Repair Question?
AppliancePartsPros has your Answer!

Questions & Answers

Ask a Question

Most Interesting

Similar to the other fan question, the microwave WHEN IT'S COLD from either air leakage from the outside vent fan ducting or the room is cold, the 12v component cooling fan does not run initially. (I have the control panel open and tilted out, but still connected) The fan test good on the bench per the tech sheet instructions (9-12v source to the leads) If the room or the unit is warm, the 12v cooling fan works fine. The owners manual also states this unit has a variable speed cooling van that "runs slow" when the unit or room is cold. My problems is the fan doesn't run at all when cold and I get an F7 within 3-5 minutes. If I let the unit set, and try again, the fan works perfect after the magnetron heat warms the electronics cavity. Understanding the wiring and component layout, there is no separate THRERMISTER anywhere depicted on the diagram. Only thermal switches to protect the magnetron and the oven cavity and the hood fan. These all test good as well. This leads me to believe, component temperature must be sensed from the from a thermister on the logic board?? This morning it was cold and so was the unit, of course the cooling fan wouldn't run initially. Subsequently, I grabbed my heat gun, accessed the logic board and restarted the unit. I gently heated the upper board and within 5 seconds the cooling fan started and ran as designed. Rhetorical question, but I believe the logic board is junk! Thoughts?

Mark for Model Number GH5184XPS-3


Was this helpful?

I took out the right bad bulb for over the stove AND DID NOT unplug microw. The bulb shorted as the gals became unattaced with the barrrel as i unscrewed it. The dash went blank and the new bulb does not work. There is power, all fuses are working however no board. No over the stove or interior lights. What do I need to fix OR what did I miss?

Bill for Model Number GH5184XPQ4 WHIRPOOL 2007


Was this helpful?

I replaced the inverter board the micro will heat now but the fan will run. I checked the motor and it will run. A repairman told me that I need a circuit board that will control the fan to cool the inverter board. Can you please tell me if thats true or I could have another problem?

Lawrence M. for Model Number gh5184xpbo


Was this helpful?