Whirlpool W10111616 Cntrl-Elec - AppliancePartsPros.com

Total
$0.00

Part Number:	AP4316847
MFG Part Number:	W10111616
Made by:	Whirlpool

Our Price
$198.86
Regularly	You Save
~~$234.65~~	$35.79

Most Interesting

My maytag bravos stopped drying so I checked heating element it had a coil burnt out there were no codes at this time. So I replaced heating element the thrmst-fix and thermistor. Now iam getting code F1 primary control is this common on this model?

Kenneth for Model Number med6400tb0

Answer Hello Kenneth, This issue is not really a common problem. It is something that can happen at any given time but the machine control [w10111616] will need to be replaced.

Was this helpful?

Is this part, W10111616, the part I need to get my dryer working since it is now flashing F1? Where can I find detail on your return policy? I've never tackled a repair like this and want to buy with confidence that if I have to abandon this mission, I am not out $170+.

Dennis for Model Number WED6600VWO

Answer Hello Dennis, The part W10111616 Control is the correct control to replace for the F1 Error code. Our website tells about the warranty and return policy.

Was this helpful?

Control display works fine when turn on and timer works. Drum does not turn-belt and motor turn easy. I suspect control board assembly defective.

Ralph for Model Number wed6600vmo

Answer Hello Ralph, With the display working you should check the continuity of the thermal fuse 3392519. If the thermal fuse blows then you will have display but no motor or heat. You may also want to check the thermostats and other thermal fuses W10169881 as well. You will also check the venting from the blower wheel all the way to the outside of unit to make sure it is clear. This is the most likely cause of the thermal fuse failing. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Latest Questions

I just replaced the electronic control consel on the top of the dryer because the dryer on switch would light up but not turn on the machine. Now, it flases F-2 and makes a clicking noise. I have power to everything and F2 keeps flashes in the window. Any idea what I need to do?

Robin for Model Number MED6600TQ0 Maytag Bravo Steamer Dryer

Answer Hello Robin. The error code is for a stuck button on the console W10170903. Check and make sure the cables are installed properly going between the two parts.

Was this helpful?

No heat from dryer. Everything else works fine.

Daniel for Model Number mde9306ayw

Answer Hello Daniel! This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair. Hope it helps, thanks! http://forum.appliancepartspros.com/dryer-repair/247828-dryer.html

Was this helpful?

Hello. I am trying to fix a friends whirlpool dryer. I have no power to the display board, but the light inside comes on. Would the problem be part number ap4316847? Thanks

Nick

Answer Hello Mick. If there is power to the electronic control W10111616 and there is no power to the interface, then you will need to replace the electronic control. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Cntrl-Elec

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information