Whirlpool W10218834 Cntrl-Elec - AppliancePartsPros.com

Total
$0.00

Part Number:	AP4411333
MFG Part Number:	W10218834
Made by:	Whirlpool

Our Price
$127.66
Regularly	You Save
~~$150.64~~	$22.98

Most Interesting

Dishwasher stopped working, so I replaced the latch, because it was broken. Still wouldn't start. So I replaced the control panel, as It seems the next step would be. Still nothing. No lights, no music. What's next?

Dan for Model Number Mdbh945aws

Answer Dan, Did you check the electrical connections in the junction box on the dishwasher lower frame ? With a new door latch/switches W10275768 we can presume, evrything there is OK. You'll need to conduct voltage checks at the control board, with the door switches "bypassed", to determine if there's voltage to the control board W10218834 This style unit has no fuses, or thermal fuses in the circuit, so the control should reacrt to any input, unless you have a bad keypad / control panel 6-919833 or no voltage to the control board.

Was this helpful?

My start button was not working. When I pressed the button a faint light appeared, but it wouldn't fire up. I could cycle through the light med and heavy cycle but it would light was not working for the med. I figured it was the control panel so I ordered a new one and installed it. Now different buttons are not functioning. Do in need a new cntrl elec?

Clayton for Model Number mdb4651aww3

Answer Hello Clayton. Make sure the ribbon cable for the control panel is seated properly in the unit. If not, it will cause the issue with the buttons. If the cable is installed properly, then it seems the electronic control W10218834 may need to be replaced also in the unit.

Was this helpful?

All the lights work on dishwasher but start button, delay and rinse only.

Mike for Model Number mdbtt60aww1

Answer Hello Mike! Try unplugging the control panel and cleaning any corrosion off the ribbon cable plug. If this does not help, replace the control panel part number 6-919846. Thanks!

Was this helpful?

Latest Questions

When choosing wash cycle light wash does not come on strong but has a tiny dot and rinse only does not light up but machine does work

Herman G. for Model Number MDBH945AWB3

Answer Hello Herman. Based on the information you provided, it sounds like the control board 6-919833 is bad and will need to be replaced. Hope this helps.

Was this helpful?

Maytag dishwasher, I can press the delay2-4-6 and lights will come on. But if I press the start button, will not start. But I can see very tiny little lights show when pressing the start button.They are like little micro dots lights. Sometimes I can take apart and check connections and will work, but I think my luck has ran out.

Chad for Model Number mdb4651aws2

Answer Hello Chad. Based on the information you provided, it sounds like the control panel 6-919806 is bad and will need to be replaced. Hope this helps.

Was this helpful?

I have the MDBH dishwasher. It's 1 1/2 years old and some lights stopped working when the buttons are pressed. Lately I must press the start button multiple times to get the washer to start. As of last week no matter how many times i push start lights will only show very dim and washer will not start when button is pressed. Does this appear to be the control board? When it worked intermittently I would have to push start 5 or 6 times and some lights worked while others did not.

Henry for Model Number MDBH945AWQ3

Answer Hello Henry. Based on the information you provided, it sounds like the control panel is bad and will need to be replaced. 6-919834 is the correct control panel for the unit. Hope this helps.

Was this helpful?

Cntrl-Elec

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information