How do you replace the Control Panel for this dishwasher? Are there instructions included with the part? This dishwasher works when it feels like it. Sometimes the lights go on and it won't start and other times its just dead.
Answer Sunshine, You stated "control panel " W10235718 which is most likely the part you need. You need to turn the power to the dishwasher OFF before you start. You'll need to remove all the screws holding the inner door liner to the outer door assembly and separate the doors. Disconnect the wirie harness to the detergent dispenser, and slip the door latch assembly out of the panel. Remove the control board cover(one screw) and disconnect the touchpad assembly ribbon from the control board, then remove the two screws that hold the control board and box to the panel. You should then be able to remove the two screws that hold the handle to the door/control panel and, grasp the ends of the control panel and lift it up and out of the door assembly. Thanks
got power to the top buttons can select wash cycle but the start button will not work, what is wrong
Answer Dan, You most likely have an issue in the control panel, "start" keypad W10235718 . You can remove the lower kickplate and retrieve the tech data sheet and varify the resistance of the keypads with a multimeter, if you wish. Here's some meter usage information : [http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html] Good Luck and Thanks
We had the same problems as listed above, bought a new board and it didnt help us. Now its not returnable. any other ideas?
Answer Hello Mindy. Based on the information you provided, it sounds like the control panel W10235718 is bad and will need to be replaced. Hope this helps.