I have a new white door coming from you next week.How can I get the top
hinge pin out? I tried prying it up but it doesn't want to move.
Bill F for Model Number mh3185xpqo
Answer Bill, You need to "unscrew" the top hinge pin " 1. Unplug microwave oven or disconnect power. 2. Remove the air grille. 3. Remove the 1 T-10 Torx® screw from the top hinge of the door. 4. Lift the door up and off the other hinge to remove the door."
I'm ordering the whole door to replace mine that is damaged. My question nis 2 part, does an instruction sheet included in the part box and 2 can I install the door without removing from over the range?
Angel for Model Number mh3185xpq1
Answer Angel, Here are some basic instructions : "Electrical Shock Hazard Disconnect power before servicing. Replace all panels before operating.
Failure to do so could result in death or electrical shock. CAUTION: When you work on the microwave oven, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful. 1. Disconnect the electrical power to the
microwave oven. 2. Open the microwave oven door and remove the choke cover. To do this: a) Use a small screwdriver and pry out on
the corner of the choke cover until the bottom locking tab pops out. b) Use a putty knife and pry out along the inner edge of the choke cover. c) Pull out on the cover to release all of the locking tabs, and remove the cover from the door. 3. To remove the oven door:
a) Lift the door and remove the bottom hinge pin from its bracket hole, then lower the door and remove the top hinge pin from its bracket hole.b) Place the door on a padded surface with the handle and outer glass facing down." In you cas you'll most likely throw the door away. Thanks and Good Luck