Condenser Fan Motor Assembly

John for Model Number ED25QFXHW01

Answer John, Normally when you get a vibration in the freezer compartment it is due to the bearings on the motor going out and the fan would need to be replaced. 

Kevin M for Model Number KSRB25FHWH02

Answer Kevin, Part number 4387244 is the manufactures direct replacement part for the original part number. Installing this part per the instructions included will ensure that the motor will work properly and that the unit will cool properly. 

Tom C.

Answer Hello Tom! Unfortunately, the manufacturer does not offer the harness separate from the assembly 4387244. Sorry about that! 

Chuck for Model Number whirlpool ED25QFXHW01

Answer Hello Chuck. It sounds like the condenser fan motor 4387244 is bad and will need to be replaced on the unit. If the compressor is running, it should be fine on the unit. If the garage is to hot, it is going to be hard for the unit to cool properly. These are made for a location around 75°. 

Donald for Model Number KSRS25IKBL03

Answer Hello Donald. You will need to check and see if the fan motor 4387244 is running on the unit. If not, and there is power coming to it, you will need to replace the fan motor. Also, make sure the coils under the unit are clean as well on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Miles for Model Number ed27pq

Answer Hello Miles. Check and see if the condenser fan motor 4387244 has quit running in the unit. If so, and there is power coming to it, you will need to replace the condenser fan motor in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html