Is there any way to hook up my old fan blade to the new motor shaft?
Answer Hello Mike. Yes, you will pull the old fan blade off the old motor. The push it onto the shaft of the new motor 2188874. Some if the fan blade can be hard to remove. Be careful not to break the blades. Hope this helps.
My refrigerator is not working or keeping cool but the freezer seems to be working ok. What could be my problem?
Answer Hello Teresa. Check and see if the fan motor inside the freezer is running properly. If not, and there is power to it, you will need to replace the fan motor W10189703. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
FRIDGE NOR FREEZER WILL COOL ANYMORE
Answer Doug, a couple of things you need to look for, Is there frost or ice built up on the back wall of the freezer compartment ? Can you hear the compressor start and run, or is there a "click" noise when it attempts to start ? Have you checked and cleaneed the condenser coil, front kickplate grille ? If all's OK, you most likely have an issue with the ADC board W10366605 in the control panel. Thanks.