I need diagnostic for kitchen aid dish washer KUDK02CRBS1 - sn: FT1204464 dishing not drying and elements looks ok this unit is about 6 yrs old.
Answer Hello Pedro. If the heater reads closed for continuity and is good, you will need to order and replace the control board on the unit. Make sure the thermal cut-out 661566 is reading closed as well. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html