Whirlpool 8531292 Control Board - AppliancePartsPros.com

Total
$0.00

Part Number:	AP3133674
MFG Part Number:	8531292
Made by:	Whirlpool

Our Price
$164.80
Regularly	You Save
~~$197.76~~	$32.96

Most Interesting

Hi, when I start my dishwasher, the clean light AND the cancel light, light up and stay on constantly.The dishwasher does start up, but never fills with water (I do see a small amount in the base). After a couple of minutes the washer stops with the clean and the cancel light on. Is this a control board problem ?? Thanks John

John for Model Number KitchenAid KUDS24SE BLO

Answer Hello John. You need to check and see if there is some buttons stuck on the switch board 9743241 on the unit. This will cause the issue you are having with the unit.

Was this helpful?

When any of the cycle buttons are pushed, the dishwasher's display lights but the dishwasher does nothing. After the usual amount of time it takes to complete the cycle, the display light turns off. I tried pushing the "Normal" cycle button, waited a few minutes, then pushed the "Cancel" button. The dishwasher does nothing; but after pushing the "Cancel" button, a few minutes later the display light turns off (as though the dishwasher has completed canceling the cycle). Thank you in advance for your assistance.

Dan for Model Number DU940QWDQ3

Answer Hello Dan, You need to check that nothing is holding the float switch in the up or raised position. If this is good, check the electrical connections to the water inlet valve. You should be reading 120Vac. If so and the unit is still not filling with water, replace the water inlet valve 3374621. Locate the tech sheet on the appliance and it will help more than I can help.

Was this helpful?

When we push the normal wash button to start the dishwasher, the light comes on but the dishwasher doesn't. Is it possible the control panel has gone bad?

Jodi S for Model Number Whirlpool dishwasher DL927QWDg1

Answer Hello Jodi. If some buttons work and others do not, you will need to order and replace the control panel on the unit.

Was this helpful?

Latest Questions

A service has told us we need a new control board for our Whirlpool dishwasher. I am wondering if we need to order a new fuse too? The one in there tests good. Does the control board come with instructions to attach wires where they belong?

Pat for Model Number DU920GWDB4

Answer Hello Pat. If the fuse is good on the unit, then you only need to order and replace the control board 8531292.

Was this helpful?

The Low Energy, Normal and Heavy buttons do not work. Others all work.

Howard for Model Number DU980PDB0

Answer Hello Howard. Make sure all connection coming from the switch to the board are good. If so, the part you are needing 3374760, has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part.

Was this helpful?

My dishwasher was in mid cycle and stopped. Water in bottom, and no lights show up on the control panel. Tried breaker. Tried unlocking it, but still no lights and not working. Did smell a burning.

Michelle for Model Number DU94oQWDB3

Answer Hello Michelle. You will need to test and see if the thermal fuse 675813 is bad in the unit and needs to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Control Board

Questions & Answers

Description

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information