The dishwasher works fine but the lights on the control panel no longer light up. What part is needed? How difficulot is it to install?
Answer Carolyn, The "LED" lights and the display and keypads, are a component of the control panel 6-920245 It's not a dfficult repair to perform. You will need "torx" tips and a driver. " 1. Disconnect power to the machine. 2. Open the Dishwasher door. 3. Remove the 11 Torx™ screws along the sides and top of the Inner Door Panel. 4. Separate the Inner Door Panel from the Outer Door. 5. Disconnect wires from the Dispenser Wax Motors before pulling the Inner Door Panel away from the Dishwasher. Remove PC Board Housing Cover. Disconnect Membrane Switch from PC Board. Remove PC Board Base. 6. Lift out Latch Assembly. Remove 4 screws securing Control Panel to Outer Door. NOTE: Facia is susceptible to damage during reinstallation."